Loading ...
Loading ...
Loading ...
Click for contents
42
Network: Wi-Fi Setting (Station Mode)
Station mode allows wireless communication from your NVR to the router
to gain internet access. This gives you the flexibility of placing your NVR in a
different location, without having to be physically connected to your router.
In Station mode your cameras also connect to your router directly via Wi-Fi
rather than connect to your NVR, so please take the distance between your
cameras and your router into consideration when using this mode.
As mentioned in the on-screen message, make sure each camera has suc-
cessfully connected with your NVR before changing modes. This is very im-
portant as your NVR will instruct the cameras as to which mode has been
selected and will send the connection information to them over Wi-Fi. If you
see all four cameras in Live View mode, you’re good to go.
Wi-Fi Mode: Click the drop down menu, select “Station” then do the follow-
ing:
1. After a short moment, a list of Wi-Fi access points that your NVR detects,
will be shown. Select your Wi-Fi access point then click the next button (circle
& triangle).
2. Input the password for your Wi-Fi access point then click the next button
(circle & triangle). Make sure the password is correct before proceeding.
3. A message will appear on-screen stating that all cameras must be con-
nected before proceeding. Click the next button (circle & triangle).
4. The cameras connected to your NVR will be displayed. A tick icon will ap-
pear in each checkbox.
5. After a brief moment your NVR will reboot then you will see your cameras
in Live View mode. You can now disconnect the Ethernet cable connected to
your NVR’s Ethernet port.
Loading ...
Loading ...
Loading ...