Loading ...
Loading ...
Loading ...
Click for contents
38
Network: General
As SwannLink Peer-to-Peer technology is utilised to communicate with your
network and mobile device, configuration of the network settings is not re-
quired. If you have networking expertise and require specific settings for your
network, you do have the ability to change them.
Network Access: You can select between two different network types that
your NVR can be connected to. The two types are:
DHCP (Dynamic Host Configuration Protocol): Your router will automatical-
ly assign an IP address to each device connected to your network. This is
enabled by default.
Static: All devices on your network have their IP address manually defined.
IP Address: Each device on your network must have a unique IP address. A
typical address might be “192.168.1.24” or something similar.
Subnet Mask: This allows the flow of network traffic between hosts to be
segregated based on a network configuration. A typical address might be
“255.255.255.0” or something similar.
Default Gateway: This allows your NVR to connect to the internet. This is
typically the same IP address as your modem or router.
Auto DNS/Static DNS: Select how would like to define your DNS servers. It’s
recommended to leave this on auto.
→ Click the “Default” button to revert back to default settings.
→ Don’t forget to click “Apply” to save settings.
Loading ...
Loading ...
Loading ...