Loading ...
Loading ...
Loading ...
Click for contents
16
Channel: Adding a Camera in Station Mode
It’s recommended that you add cameras to your NVR when it’s in AP mode
(see page 15 - Channel: Adding a Camera in AP Mode) before changing to
Station mode.
1. When all cameras have been added to your NVR, for Wi-Fi Mode click the
drop down menu and select “Station” (as shown above).
2. After a short moment, a list of Wi-Fi access points that your NVR detects,
will be shown. Select your Wi-Fi access point then click the next button (circle
& triangle).
3. Input the password for your Wi-Fi access point then click the next button
(circle & triangle). Make sure the password is correct before proceeding.
4. A message will appear on-screen stating that all cameras must be con-
nected before proceeding. Click the next button (circle & triangle).
5. The cameras connected to your NVR will be displayed. A tick icon will ap-
pear in each checkbox. If one or more cameras haven’t appeared, click the
“Refresh” button otherwise click the “Apply” button.
6. After a brief moment your NVR will reboot then you will see your cameras
in Live View mode. You can now disconnect the Ethernet cable connected to
your NVR’s Ethernet port.
Loading ...
Loading ...
Loading ...