Loading ...
Loading ...
Loading ...
Click for contents
22
Configuring your Swann PT Cam (SWWHD-PTCAM)
If you have previously purchased a Swann PT Cam (also known as Wi-Fi Pan & Tilt Security Camera) or
looking to add an additional camera to your NVR, the Swann PT Cam is fully compatible with your NVR.
You can use the PTZ controls to pan and tilt the camera. Multiple preset positions can also be created,
which can be recalled to focus the camera’s view to a different position.
Please note: Your NVR supports a maximum of four cameras that can be configured and displayed.
If you have the maximum amount of cameras configured and would like to use the PT Cam, you
need to disconnect one of the cameras first (see page 14 - Channel: Managing Cameras).
The following instructions are dependent on which mode your NVR is running in, AP or Station mode.
AP Mode: If your NVR and PT Cam are physically connected to your Wi-Fi access point using the supplied
Ethernet cables, your NVR will detect the PT Cam automatically and will appear in Live View mode. If you
don’t see the PT Cam in Live View mode, please do the following:
1. Right-click the mouse in Live View mode to access the Menu Bar then click the “Channel” button.
2. Assign the PT Cam a channel number (as shown above) then click “Apply”. After a short moment, the
PT Cam will appear in Live View mode. Close the Device List when finished.
(continued on next page)
Loading ...
Loading ...
Loading ...