Loading ...
Loading ...
Loading ...
Click for contents
15
Channel: Adding a Camera in AP Mode
By default, the cameras ship ready to connect to your NVR’s default Wi-Fi
settings. Simply connect each camera to power and wait about a minute. You
will see the camera in Live View mode.
If your NVR’s Wi-Fi settings have changed, please do the following:
1. In Live View mode, right-click the mouse to access the Menu Bar then click
the “Menu” button.
2. Click “Network” then click “Wi-Fi Setting”. You will see a QR code dis-
played (as shown above).
3. Click and hold the camera’s reset/pair button until you hear a message
from the camera’s speaker.
4. Take your camera and face it towards the QR code to scan (you may need
to get close to the screen to scan). When successful, you will hear a beep and
the voice will announce that the scan is successful. After a short moment,
you will see the camera in Live View mode.
Repeat these steps for any additional cameras that you have.
→ Click the “Help” button for instructions on how to sync Wi-Fi settings to
your cameras.
→ Click the “Default” button to revert back to default settings.
→ Don’t forget to click “Apply” to save settings.
Loading ...
Loading ...
Loading ...