Loading ...
Loading ...
Loading ...
72 GETTING TO KNOW YOUR VEHICLE
Door Frame Removal
NOTE:
The rear door frames must be removed first,
foll
owed by the front door frames.
1. Using the provided #T40 T
orx head driver
and ratchet, loosen the Torx head
fasteners located on the underside of each
door hinge (two per door).
Door Frame Torx Head Fastener Locations
2. Once all the way loosened, remove the Torx
he
ad fasteners by pulling downward.
NOTE:
The fasteners will not fall out once completely
l
oo
se, as they are held in place by an internal
mechanism.
Remove Fasteners From Below Frame
3. Lift the frame upward, removing it from the
ve
hicle.
Step Three
4. Store the fasteners in a secure location.
5.
Repeat the procedure on the front door
fr
ame.
Door Frame Installation
NOTE:
The door frames (if equipped with a soft top)
can
be installed when the doors are attached or
removed.
1. Install the front door frame first.
2.
Ensure the windshield is in the “up” posi-
ti
on. Carefully place the front door frame in
the
rubber seal at the top of the windshield,
and line up the holes for the Torx head
fasteners (two for each door).
WARNING!
Do not drive your vehicle on public roads with
the door and/or door frame(s) removed as
you will lose the protection that they can
provide. This procedure is furnished for use
during off-road operation only.
Loading ...
Loading ...
Loading ...