Loading ...
Loading ...
Loading ...
220 STARTING AND OPERATING
To Start The Engine While In Autostop Mode
When the gear selector is in NEUTRAL, the
engine will start when the clutch pedal is
pressed (does not require complete/full pedal
press). The vehicle will go into STOP/START
SYSTEM NOT READY mode until the vehicle
speed is greater than 5
mph (8 km/h).
Conditions that will cause the engine to start
aut
omatically while in STOP/START AUTO STOP
ACTIVE mode, the engine will start automatically
when:
Actual cabin temperature is significantly
different than temperature set on Auto HVAC.
HVAC is set to full defrost mode
STOP/START AUTOSTOP ACTIVE time
exceeds 5 minutes
Battery voltage drops too low
Low brake vacuum e.g. after several brake
pedal applications
Vehicle is moving faster than 5 mph (8 km/h)
Stop/Start OFF switch is pressed
4WD system is put into 4L or Neutral mode
Steering wheel is turned beyond threshold
To Manually Turn Off The Stop/Start System
1. Push the Stop/Start Off switch (located on
the switch bank). The light on the switch
will illuminate.
Stop/Start OFF Switch
2. The STOP/START OFF message will appear
in
the instrument cluster. Refer to
“Instrument Cluster Display” in “Getting To
Know Your Instrument Panel” for further
information.
3. At the next vehicle stop (after turning off the
St
op/Start system), the engine will not be
stopped.
4. If the Stop/Start system is manually
sw
itched off, the engine can only be started
and stopped by cycling the ignition switch.
5. The Stop/Start system will reset itself back
to
an ON condition every time the ignition is
cycled off and back on.
Loading ...
Loading ...
Loading ...