Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 61
NOTE:
The soft top and the hard top are to be used
ind
ependently. Your vehicle warranty will not
cover damage resulting from both tops being
installed at the same time.
For your convenience, a tool kit is provided with
you
r vehicle located in the center console. This
kit includes the necessary tools required for the
operations described in the following sections.
All pieces fit into the ratchet for easy use.
Provided Tools
Removing The Hard Top
1. Remove both front panels. Refer to “Front
Panel(s) Removal” in “Freedom Top
Three-Piece Modular Hard Top — If
Equipped” for removal instructions.
2. Open both doors.
3.
Using the provided #T50 T
orx head driver
and ratchet, remove the Torx head fastener
that secures the hard top at the B-pillar
(near the top of the front door) on each side.
Torx Head Fastener Location — Left Side Shown
4. If equipped, remove the lower interior soft
tr
im panel attached by the hook-and-loop
fastener.
Interior Soft Trim Panel (If Equipped)
5. R
emove the two Torx head fasteners, one
on
each side, that secure the hard top to the
vehicle (along the interior bodyside rear
-
ward of the back doors) using the #T50 Torx
hea
d driver.
1 — #T50 Torx Head Driver
2 — #T40 Torx Head Driver
3 — 15 mm Socket
4 — Ratchet
2
Loading ...
Loading ...
Loading ...