Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 215
If the ESC OFF button is pushed while in Off
Road+, the following will occur on the vehicle:
Push of the ESC Button: Traction Control will
turn off, but Stability Control will remain
active.
Hold the ESC OFF Button for five seconds:
Traction Control and Stability Control will turn
off.
ELECTRO-HYDRAULIC POWER STEERING
Your vehicle is equipped with an
electro-hydraulic power steering system that
will give you good vehicle response and
increased ease of maneuverability in tight
spaces. The system will vary its assist to provide
light efforts while parking and good feel while
driving. If the electro-hydraulic power steering
system experiences a fault that prevents it from
providing power steering assist, then the
system will provide mechanical steering
capability.
If the “SERVICE POWER STEERING”
message and a flashing icon are
d
is
played on the instrument cluster
screen, it indicates that the vehicle
needs to be taken to the dealer for service. It is
likely the vehicle has lost power steering
assistance. Refer to “Instrument Cluster
Display” in “Getting To Know Your Instrument
Panel” for further information.
If the “POWER STEERING HOT” message and an
ico
n are displayed on the instrument cluster
screen, it indicates that extreme steering
maneuvers may have occurred, which caused
an over temperature condition in the power
steering system. You will lose power steering
assistance momentarily until the over
temperature condition no longer exists. Once
driving conditions are safe, then pull over and
let vehicle idle for a few moments until the light
turns off. Refer to “Instrument Cluster Display”
in “Getting To Know Your Instrument Panel” for
further information.
NOTE:
Even if power steering assistance is no longer
operational, it is still possible to steer the
vehicle. Under these conditions there will be
a substantial increase in steering effort,
especially at very low vehicle speeds and
during parking maneuvers.
If the condition persists, see your authorized
dealer for service.
STOP/START SYSTEM — AUTOMATIC
TRANSMISSION (IF EQUIPPED)
The Engine Stop/Start (ESS) function is
developed to reduce fuel consumption. The
system will stop the engine automatically during
a vehicle stop if the required conditions are
met. Releasing the brake pedal or pressing the
accelerator pedal will automatically re-start the
engine.
ESS vehicles have been upgraded with a heavy
dut
y starter, enhanced battery, and other
upgraded engine parts, to handle the additional
engine starts.
CAUTION!
Extreme steering maneuvers may cause the
electrically driven pump to reduce or stop
power steering assistance in order to prevent
damage to the system. Normal operation will
resume once the system is allowed to cool.
5
Loading ...
Loading ...
Loading ...