Loading ...
Loading ...
Loading ...
70 GETTING TO KNOW YOUR VEHICLE
6. Remove the four Torx head fasteners that
secure the hard top to the back of the
vehicle cab using the #T50
Torx head
dri
ver.
Torx Head Fastener Locations
7. Locate the wire harness on the left rear
in
side corner of the vehicle. To access the
harness, remove the plastic cover by
pushing on the side of the cover and sliding
it off.
NOTE:
Do not force open; this will break the plastic
cov
er.
Step Seven
8. To release the wire harness, pull back on
th
e red latch, then push down on the black
button while pulling the harness out.
Pull Back On Red Latch
Push Black Button To Release
9. Remove the hard top from the vehicle.
In
stall the edge protectors and place the
hard top on a soft surface to prevent
damage.
CAUTION!
The removal of the hard top requires four
adults located on each corner. Failure to
follow this caution could damage the hard
top.
Loading ...
Loading ...
Loading ...