Loading ...
Loading ...
Loading ...
64 GETTING TO KNOW YOUR VEHICLE
1. Locate and remove the following items
prior to hard top removal:
Right and left side door frames
Rear belt rail
Eight door frame attachment Torx head
fasteners
Right and left side quarter panel cover
assemblies
Rear window
2. Remove the hard top. Refer to “Removing
Th
e Hard Top” in this section.
3. Install the belt rail on the rear of the vehicle.
Se
cure the belt rail using the six fasteners
with the provided #T50
Torx head driver
and
ratchet. Refer to the table below for
recommended torque specifications.
Belt Rail Fasteners
4. R
emove the storage cover on the quarter
tr
im. Use the emergency key blade to pry
the cover open.
Pry Open Storage Cover
5. T
uck the wire harness inside the storage
co
mpartment.
Correct Placement Of Wire Harness
Torque
Spe
cification
For Torx
Fastener
Maximum Minimum
119.5 in-lbs 150.5 in-lbs 106.2 in-lbs
13.5 N·m 17.0 N·m 12.0 N·m
CAUTION!
Do not overtighten Torx fasteners. Damage to
the retainers will occur.
1 — Rear Fasteners
2 — Corner Fasteners
Loading ...
Loading ...
Loading ...