Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 279
Bulb Replacement
NOTE:
Lens fogging can occur under certain atmo-
spheric conditions. This will usually clear as
a
tm
ospheric conditions occur to allow the
condensation to change back into a vapor.
Turning the lamps on will usually accelerate the
clearing process.
Halogen Headlamps
NOTE:
We advise referring to an authorized dealer for
ser
vice.
1. Open hood and support using prop rod.
2.
Remove the front grille. Turn the retainers
al
ong the top a quarter turn counterclock-
wise and remove.
3. P
ull the bottom of the grille away, starting at
on
e side and working toward the other.
4. Remove the three screws holding the head-
la
mp to the vehicle.
5. Remove lamp from the vehicle.
6.
Remove the lamp from the collar.
7.
Grasp the bulb and turn a quarter turn coun-
te
rclockwise.
8. Pull the bulb from the housing.
9.
Push connector locking tab to the unlock
po
sition.
10. Remove connector from bulb.
11
. Push connector onto new bulb base, and
pu
sh the connector locking tab to the lock
position.
12. Reinstall bulb housing. Rotate the bulb a
qu
arter turn clockwise.
Front Park/Turn Signal
NOTE:
We advise referring to an authorized dealer for
ser
vice.
1. Remove the front wheel liner fasteners to
ac
cess bulb sockets.
Wheel Liner
2. Turn the socket assembly a quarter turn
co
unterclockwise and remove from
housing. Pull the bulb straight from the
socket to replace.
LED Front Side Marker
1. Remove the front wheel liner fasteners to
access side maker screw and electrical
connector.
2. Remove fastening screw in the back of the
fr
ont side maker assembly and disconnect
electrical connector.
CAUTION!
Do not touch the new bulb with your fingers.
Oil contamination will severely shorten bulb
life. If the bulb comes in contact with any oily
surface, clean the bulb with rubbing alcohol.
6
Loading ...
Loading ...
Loading ...