Loading ...
Loading ...
Loading ...
30 GETTING TO KNOW YOUR VEHICLE
To remove the rear doors, proceed as follows:
1. Roll down the glass window to prevent any
da
mage.
2. Remove the hinge pin nuts from the upper
an
d lower outside hinges (using a #T50 Torx
hea
d driver).
NOTE:
The hinge pin nuts can be stowed in the
F
as
tener Bin under the rear seat.
Hinge Pin Nut
3. Slide the front seat(s) fully forward.
4.
Pry open and remove the plastic wiring
ac
cess door from the bottom of the B-pillar.
Wiring Access Door
5. Unplug the wiring connector.
NO
TE:
Squeeze the tab on the base of the wiring
h
ar
ness. This will unlock the connector tab,
allowing the wiring connector to be unplugged.
Unhook the wire harness strap from the hook on
the bodyside door opening. Store the wire
connector into the lower basket of the door.
Wiring Connector
Loading ...
Loading ...
Loading ...