Loading ...
Loading ...
Loading ...
100 GETTING TO KNOW YOUR VEHICLE
Auxiliary Switches — If Equipped
Four auxiliary switches are located in the lower
switch bank of the instrument panel and can be
used to power various electrical devices.
The functionality of the auxiliary switches can
be
changed via the Uconnect settings. All
switches can be configured for setting the
switch type operation to latching or momentary,
power source of either battery or ignition, and
ability to hold last state across key cycles.
Auxiliary Switches
NOTE:
Holding last state conditions are met when
s
wi
tch type is set to latching and power source
is set to ignition.
For more information, refer to “Uconnect
Set
tings” in “Multimedia”.
The auxiliary switches manage the relays that
pow
er four blunt cut wires. These wires are
located under the instrument panel in the
passenger compartment and under the hood to
the right, near the battery.
Auxiliary Switch Connections — Under Hood
Auxiliary Switch Connections – Under Instrument Panel
In addition to the four auxiliary switch wires, a
fus
ed battery wire and ignition wire are also
located in the interior, on the passenger side
under the instrument panel.
A kit of splices and heat shrink tubing are
pro
vided with the auxiliary switches to aid in the
connection/installation of your electrical
devices.
If this outlet is mishandled, it may cause an
electric shock and failure.
WARNING! (Continued)
Loading ...
Loading ...
Loading ...