Loading ...
Loading ...
Loading ...
Use the following steps to mount the front
license plate:
Before mounting the license plate, confirm
that the following parts are enclosed in the
plastic bag:
Only use the recommended mounting posi-
tion, otherwise the obstruction of the Intelli-
gent Cruise Control (ICC) sensor (if so
equipped) may result.
• License plate bracket
• License plate screws x 2
• Screw grommets x 2
1) Park the vehicle on flat, level ground.
2) Locate the center position
䊊
A
as illus-
trated. Line up the license plate bracket
under the top of the front bumper with
the tabs
䊊
B
. Hold the license plate bracket
in place.
3) Mark the center of the holes
䊊
C
with a
felt-tip pen.
4) Carefully drill two pilot holes using a 10
mm (0.39 in) drill bit at the marked loca-
tions. (Be sure that the drill only goes
through the bumper fascia.)
5) Insert the grommets into the holes in the
bumper fascia.
6) Install the license plate bracket with the
provided screws.
7) Install the license plate on to the bracket
with bolts that are no longer than 14 mm
(0.55 in).
NTI327
INSTALLING FRONT LICENSE PLATE
Technical information 10-13
Loading ...
Loading ...
Loading ...