Loading ...
Loading ...
Loading ...
1. Push the <MENU> button
䊊
B
on the
INFINITI Controller and touch [Settings]
䊊
A
in the vehicle information display.
2. Touch [Camera]/[Sonar]
3. Touch [Camera]
4. Touch [Predictive Course Lines]
When this item is turned on, the predicted
course line is displayed on the rear view
screen when the shift lever is in the R
(Reverse) position.
REARVIEW MONITOR SYSTEM
LIMITATIONS
WARNING
Listed below are the system limitations for
RearView Monitor. Failure to operate the
vehicle in accordance with these system
limitations could result in serious injury or
death.
•
The system cannot completely eliminate
blind spots and may not show every object.
• Underneath the bumper and the corner
areas of the bumper cannot be viewed
on the RearView Monitor because of its
monitoring range limitation. The system
will not show small objects below the
bumper, and may not show objects close
to the bumper or on the ground.
• Objects viewed in the RearView Moni-
tor differ from actual distance because a
wide-angle lens is used.
•
Objects in the RearView Monitor will ap-
pear visually opposite than when viewed in
the rear view and outside mirrors.
• Use the displayed lines as a reference.
The lines are highly affected by the num-
ber of occupants, fuel level, vehicle posi-
tion, road conditions and road grade.
• Make sure that the lift gate is securely
closed when backing up.
• Do not put anything on the rear view
camera. The rear view camera is in-
stalled above the license plate.
• When washing the vehicle with high-
pressure water, be sure not to spray it
around the camera. Otherwise, water
may enter the camera unit causing wa-
ter condensation on the lens, a malfunc-
tion, fire or an electric shock.
• Do not strike the camera. It is a precision
instrument. Otherwise, it may malfunc-
tion or cause damage resulting in a fire
or an electric shock.
The following are operating limitations and
do not represent a system malfunction:
• When the temperature is extremely high or
low, the screen may not clearly display
objects.
• When strong light shines directly on to the
camera, objects may not be displayed
clearly.
• Vertical lines may be seen in objects on the
screen. This is due to strong reflected light
from the bumper.
• The screen may flicker under fluorescent
light.
• The colors of objects on the RearView
Monitor may differ somewhat from the
actual color of objects.
• Objects on the monitor may not be clear in
a dark environment.
• Do not use wax on the camera window.
Wipe off any wax with a clean cloth damp-
ened with mild detergent diluted with
water.
4-24 Display screen, heater and air conditioner, and audio system
Loading ...
Loading ...
Loading ...