Loading ...
Loading ...
Loading ...
MONITOR SYSTEM
Symptom Possible cause Possible solution
The image on the display is not clear. The front of the camera lens is dirty. Gently wipe off the dirt with a damp soft cloth.
Moisture drops such as rain or snow form on the
camera lens.
Gently wipe off the drops with a soft cloth.
Light such as sunlight or a headlight beam from
another vehicle directly enters the camera.
This is not a malfunction. It will return to normal
when the light disappears.
Moisture condensation occurs in the camera lens
due to rapid temperature change.
This is not a malfunction. It will return to normal
after driving for short period of time.
Objects on the display may not be clear in a dark
place or at night.
Adjust the brightness or the contrast settings of
the screen.
The image on the display flickers. The vehicle is under fluorescent light. This is not a malfunction.
The colors of the object on the display look
different from those of the actual object.
This is a typical phenomenon for cameras. This is not a malfunction.
Image does not appear on the display. The shift lever is not shifted to the R (Reverse)
position.
Shift the shift lever to the R (Reverse) position.
[Automatic Display with Sonar] is OFF. Set [Automatic Display with Sonar] to ON.
The image appears on the display from the wrong
angle.
The lift gate is open. Close the lift gate.
The image on the display is not clearly visible. Strong light or reflected light enters the camera. This is not a malfunction.
The sensor is not detective. There is ice or snow on the sensor. Flush out ice and snow with warm water.
There is dirt, mud or wax on the sensor. Gently wipe off the dirt with a damp soft cloth.
Vertical lines appear on the image. Strong reflected light from the bumper enters the
camera.
This is not a malfunction.
Display screen, heater and air conditioner, and audio system 4-135
Loading ...
Loading ...
Loading ...