Loading ...
Loading ...
Loading ...
Touch recessed sensor surface
䊊
1
on the
door handle until the side windows are fully
closed.
NOTE
Make sure you only touch recessed sensor
surface
䊊
1
.
To interrupt convenience opening: release
the recessed sensor surface
䊊
1
on the door
handle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
1. Switch the ignition switch to the ON po-
sition.
2. Close the door.
3. Pull the corresponding switch on the door
control panel until the side window is
completely closed
4. Hold the switch for an additional second.
If the side window opens again slightly:
1. Immediately pull the corresponding switch
on the door control panel until the side
window is completely closed.
2. Hold the switch for an additional second.
3. If the corresponding side window remains
closed after the button has been released,
the side window has been reset correctly.
If this is not the case, repeat the steps
above again.
If the power window automatic function
does not operate properly after performing
the procedure above, have your vehicle
checked. It is recommended you visit an
INFINITI retailer for this service.
䊊
1
Close
䊊
2
Open
CAUTION
• Do not place heavy objects on the glass
roof or surrounding area.
• Do not hang from the sunshade or hang
any objects from it. It may cause damage
or deformation to the sunshade.
• Close the sunshade when you leave the
vehicle for extended periods of time to
prevent the inside of the vehicle from
reaching high temperatures.
SUNSHADE OPERATION
The sunshade operates only when the igni-
tion switch is in the ON position.
NPA1478 NIC2646
FIXED GLASS ROOF (IF EQUIPPED)
2-76 Instruments and controls
Loading ...
Loading ...
Loading ...