Loading ...
Loading ...
Loading ...
FRONT SEATS
Manual seat adjustment
Forward and backward:
Pull the lever
䊊
1
up and hold it while sliding
the seat forward or backward to the pre-
ferred position. Release the lever to lock the
seat in position.
Seat cushion angle (if equipped):
Adjust the angles so that your thighs are
lightly supported. Turn handwheel
䊊
2
for-
wards or backwards.
Seat lifter (if equipped):
Repeatedly pull up or push down the adjust-
ing lever
䊊
3
, to adjust the seat height to the
desired position.
Seatback angle:
Relieve the pressure on the seatback and turn
handwheel
䊊
4
forwards or backwards.
The reclining feature allows the adjustment
of the seatback for occupants of different
sizes to help obtain the proper seat belt fit.
(See "Seat belts" later in this section.)
The seatback may be reclined to allow occu-
pants to rest when the vehicle is parked.
Lumbar support:
The lumbar support feature provides lower
back support to the driver.
Push each side of the adjusting switch to
adjust the seat lumbar area until the desired
position is achieved.
䊊
1
To raise the seatback contour
䊊
2
To soften the seatback contour
䊊
3
To lower the seatback contour
䊊
4
To harden the seatback contour
Power seat adjustment
Operating tips:
• The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during the seat adjustment, wait 30
seconds, then reactivate the switch.
NIC2605 NIC2607
Safety — seats, seat belts and supplemental restraint system 1-3
Loading ...
Loading ...
Loading ...