Loading ...
Loading ...
Loading ...
How to change the set distance to
the vehicle ahead
The distance to the vehicle ahead can be
selected at any time depending on the traffic
conditions.
To increase the distance to the vehicle ahead,
turn the knob
䊊
3
toward the rear
䊊
2
.To
decrease the distance to the vehicle ahead,
turn the knob
䊊
3
toward the front
䊊
1
.
You can see this distance in the vehicle infor-
mation display.
The distance to the vehicle ahead will change
according to the vehicle speed. The higher the
vehicle speed, the longer the distance.
Approach warning
If your vehicle comes closer to the vehicle
ahead due to rapid deceleration of that ve-
hicle or if another vehicle cuts in, the system
warns the driver with the chime and distance
warning light. Decelerate by depressing the
brake pedal to maintain a safe vehicle dis-
tance if:
• The chime sounds.
• The distance warning light is illuminated.
The warning chime may not sound and the
distance warning light may not illuminate in
some cases when there is a short distance
between vehicles. Some examples are:
• When the vehicles are traveling at the
same speed and the distance between ve-
hicles is not changing. In this case, the
distance warning light will be on.
• When the vehicle ahead is traveling faster
and the distance between vehicles is in-
creasing.
• When a vehicle cuts in near your vehicle
• The warning chime will not sound and the
distance warning light will not illuminate
when:
– The vehicle approaches other vehicles
that are parked or moving slowly.
– The accelerator pedal is depressed,
overriding the system.
Also, the sensor sensitivity can be affected by
vehicle operation (steering maneuver or driv-
ing position in the lane) or traffic or vehicle
condition (for example, if a vehicle is being
driven with some damage).
Automatic cancellation
A chime sounds and the message [ICC off] is
displayed in the vehicle information display
for 5 seconds under the following conditions
and the control is automatically canceled.
• The electric parking brake is applied.
• The VDC intervenes or the VDC is deacti-
vated.
• The P (Park), R (Reverse) or N (Neutral)
position is engaged.
• The cruise control lever is pulled in order to
pull away but the front passenger door or
one of the rear doors is open.
• The vehicle is skidding or a wheel slips.
• Active Park Assist is activated.
NSD583A
5-56 Starting and driving
Loading ...
Loading ...
Loading ...