Loading ...
Loading ...
Loading ...
19
Safety Instructions
Safety Instructions
Pay attention to the following points regarding installation and handling of the projector.
• If the projector will not be used for a long period of time, be sure
to remove the power plug from the power outlet to ensure safety.
Failure to do so presents a risk of fire if dust accumulates on the
plug or outlet.
• Parts of the cabinet around and above the exhaust vents may
become hot during projection. Touching these areas during
operation could cause burns to the hands. Pay particular
attention in preventing young children from touching these parts.
Additionally, do not place any metal objects around or above the
exhaust vents. Due to the heat from the projector, doing so could
cause an accident or personal injury.
• Do not place any heavy objects on top of the projector or sit /
stand on it. Pay particular attention to prevent small children from
doing so. The projector may be knocked over and this could
result in damage or a personal injury.
• Do not place the projector on an unstable or slanted surface.
Doing so may cause the projector to fall or be knocked over and
could result in a personal injury.
• Do not place any objects in front of the lens
during projection. Also, do not start projection
with the lens cap on. Doing so could cause a
fire.
When handling the lamp, pay attention to the following points.
• Lamps are more likely to rupture once the lamp replacement
message has been displayed. Replace the lamp with a new one
as soon as possible.
• Be sure to switch off the power and wait for approximately 1 hour
for the lamp and the projector to cool down sufficiently. Failure to
do so could result in a burn or personal injury due to heat from
the lamp or projector.
• Be prepared by keeping a spare lamp.
• Dispose of used mercury lamps in accordance with local
regulations.
Loading ...
Loading ...
Loading ...