Loading ...
Loading ...
Loading ...
Advanced Projection
158
Using PC-Free Multi Projection
A JPEG image on a USB flash drive can be divided among up to nine projectors
and combined into a single, large image.
With this feature, the projector that produces the image in the upper left is called
the Master projector and the other eight, Slave projectors. The image as a whole is
controlled by the Master projector.
■ Preparing for Projection
1 Set up the projectors.
On each projector, configure installation and image adjustment settings such
as edge blending (P97) and keystone correction (P95) to blend overlapping
areas.
2 Enable networking.
Connect the projectors with LAN cables and set [Network (wired/wireless)] to
[On/Off] or [On/On (Pj AP)] (P122).
3 Configure some projectors as Slaves.
In the [Input settings] menu, select [PC-free multi projection] > [Mode setting] >
[Slave].
Complete this setting on each Slave projector.
USB flash drive
Master Slave
Slave Slave
Loading ...
Loading ...
Loading ...