Loading ...
Loading ...
Loading ...
113
Menu Description
Advanced Guide Menu Description
Air filter counter
This resets the counter which reminds you of the time for cleaning and replacing the air filter.
Power counter
Indicates the total time that the projector has been connected to a power supply.
Firmware
Update the projector firmware as follows. Download firmware updates from the Canon
website and store them at the root directory on a USB flash drive.
Check the version indicated before updating the firmware.
Factory defaults
You can reset the menu item settings and restore the system settings to the factory defaults.
Option Function
OK Settings are reset to default.
Cancel Settings are not reset to default.
For details on replacing or cleaning the filter, see “Cleaning the Air Filter” (P171 –
P172), “Replacing the Air Filter” (P173).
This value is not reset even if [Factory defaults] is executed.
• Firmware versions shown here are for illustration only and differ from actual
versions.
• In some cases, it may not be possible to download updates. For details, contact the
Canon Customer Support Center.
• Firmware updating takes a few minutes. During the update, the LED indicator will
flash in red. Do not turn off the projector while the LED is flashing. After the update,
the projector will automatically turn itself off and enter standby mode.
Loading ...
Loading ...
Loading ...