Loading ...
Loading ...
Loading ...
Menu Description
108
Power management mode
> [System settings] > [Power management mode]
You can specify to turn off the lamp or projector automatically after a certain period
if the projector and remote control are not used and there is no input signal.
HDMI image input
Set the type of equipment which is connected to the HDMI port. Note that to some extent, the
[HDMI image input] setting determines which image modes are available. (P61)
Option Function
Auto
Select when AV equipment will be connected. Image processing, menu
displays, and other elements are adjusted for video equipment.
Computer
Select when a computer will be connected. Image processing, menu
displays, and other elements are adjusted for a computer.
HDBaseT image input
Specify the type of equipment connected to the HDBaseT port. Note that to some extent, the
[HDBaseT image input] setting determines which image modes are available. (P61)
Option Function
Auto
Select when AV equipment will be connected. Image processing, menu
displays, and other elements are adjusted for video equipment.
Computer
Select when a computer will be connected. Image processing, menu
displays, and other elements are adjusted for a computer.
Option Function
Disabled Disable power management mode.
Lamp off Only turns the lamp off.
Standby Turns the projector off and puts it in standby.
• After the lamp is turned off, projection resumes when the same input signal is restored,
or when the remote control or projector is operated.
• After the projector enters standby, restoring projection requires the same steps as when
turning the projector on normally.
• When [Disabled] is selected, [Direct power on] (P109) is not available.
• This setting can also be adjusted from the power saver settings screen by pressing the
ECO button on the remote control.
Loading ...
Loading ...
Loading ...