Loading ...
Loading ...
Loading ...
12. Click the Quality drop-down list, and then select a quality setting. When Auto is selected, you can adjust the
detection level of color from the Auto Color detect adjust drop-down list.
13. Click the File Type drop-down list, and then select the file type you want to use for the scanned document.
14. Click the Document Size drop-down list, and then select your document size from the list. This is necessary
to make sure the scanned file is the correct size.
15. Turn on the Edge Fill For Plastic Card option to add a white edge around the border of your scanned image.
Edge Fill For Plastic Card is only available when scanning from the Card Slot.
16. In the Margin Settings, enter a value between -4 and 2 to add or remove a specific margin at the edge of the
image.
17. Click the File Size drop-down list, and then select your file size from the list.
18. Select On from the Skip Blank Page option, to remove blank pages of the document from the scanning
results.
19. Click the Skip blank page sensitivity drop-down list, and then select a sensitivity level.
20. Turn On the 2-sided Scan setting to scan both sides of the document.
21. Click the Brightness drop-down list, and then select the brightness level.
22. Click the Contrast drop-down list, and then select the contrast level.
23. Select On from the Continuous Scan option to continue scanning.
24. Set the Passive Mode option to off or on depending on your FTP server and network firewall configuration.
The default setting is on. In most cases, this setting does not need to be changed.
25. Change the Port Number setting used to access the FTP server. The default for this setting is port 21. In
most cases, this setting does not need to be changed.
26. Click Submit.
You can set the scanned file name and file name style in the Scan File Name menu in the left navigation
bar.
Related Information
• Scan to FTP
49
Loading ...
Loading ...
Loading ...