2002 HYUNDAI ATOS User Manual

Loading ...

DRIVING YOUR HYUNDAIDRIVING YOUR HYUNDAI

DRIVING YOUR HYUNDAI

2- 2

C020A01A-AAT

BEFORE STARTING THE ENGINEBEFORE STARTING THE ENGINE

BEFORE STARTING THE ENGINE

Before you start the engine, you should always:

1. Look around the vehicle to be sure there are

no flat tires, puddles of oil, water or other

indications of possible trouble.

2. After entering the car, check to be sure the

parking brake is engaged.

3. Check that all windows, and lights are clean.

4. Check that the interior and exterior mirrors

are clean and in position.

5. Check your seat, seatback and headrest to

be sure they are in their proper positions.

6. Lock all the doors.

7. Fasten your seat belt and be sure that all

other occupants have fastened theirs.

8. Turn off all lights and accessories that are

not needed.

9. When you turn the ignition switch to "ON",

check that all appropriate warning lights are

operating and that you have sufficient fuel.

10.Check the operation of warning lights and all

bulbs when key is in the "ON" position.

o To start the engine, insert the ignition key

and turn it to the "START" position. Release

it as soon as the engine starts. Do not hold

the key in the "START" position for more

than 15 seconds.

NOTE:NOTE:

NOTE:

For safety, the engine will not start if theFor safety, the engine will not start if the

For safety, the engine will not start if the

shift lever is not shift lever is not

shift lever is not

in "P" or "N" Positionin "P" or "N" Position

in "P" or "N" Position

(Automatic Transaxle).(Automatic Transaxle).

(Automatic Transaxle).

C040A01A-AAT

KEY POSITIONSKEY POSITIONS

KEY POSITIONS

WARNING:WARNING:

WARNING:

The engine should not be turned off or theThe engine should not be turned off or the

The engine should not be turned off or the

key removed from key removed from

key removed from

the ignition key cylinderthe ignition key cylinder

the ignition key cylinder

while the vehicle is in motion. The steeringwhile the vehicle is in motion. The steering

while the vehicle is in motion. The steering

wheel wheel

wheel

is locked by removing the key.is locked by removing the key.

is locked by removing the key.

"START""START"

"START"

The engine is started in this position. It will

crank until you release the key.

NOTE:NOTE:

NOTE:

Do not hold the key in the "START" positionDo not hold the key in the "START" position

Do not hold the key in the "START" position

for more than 15 seconds.for more than 15 seconds.

for more than 15 seconds.

"ON""ON"

"ON"

When the key is in the "ON" position, the

ignition is on and all accessories may be turned

on. If the engine is not running, the key should

not be left in the "ON" position. This will dis-

charge the battery and may also damage the

ignition system.

"ACC""ACC"

"ACC"

With the key in the "ACC" position, the some

electrical accessories (radio etc.) may be oper-

ated.

"LOCK""LOCK"

"LOCK"

The key can be removed or inserted in this

position. To protect against theft, the steering

wheel locks by removing the key.

NOTE:NOTE:

NOTE:

To unlock the steering wheel, insert the key,To unlock the steering wheel, insert the key,

To unlock the steering wheel, insert the key,

and then turn the and then turn the

and then turn the

steering wheel and keysteering wheel and key

steering wheel and key

simultaneously.simultaneously.

simultaneously.

C030A02X-GAT

COMBINATION IGNITION SWITCHCOMBINATION IGNITION SWITCH

COMBINATION IGNITION SWITCH

To Start the EngineTo Start the Engine

To Start the Engine

o If your Hyundai is equipped with a manual

transaxle, place the shift lever in neutral and

depress the clutch pedal fully.

o If your Hyundai has an automatic transaxle,

place the shift lever in "P" (park).

C040A01E

LOCKLOCK

LOCK

ACCACC

ACC

ONON

STARTSTART

START

Loading ...

User Manual - Page 65