Loading ...
Loading ...
Loading ...
WHAT TO DO IN AN EMERGENCY
3-6
SD070I1-E
7. Re-install Wheel Nuts
D060H01A
Fit the wheel nuts onto the studs and tighten
with the wheel brace.
D060I01A
XD070J1-E
8. Lower Vehicle and Tighten Nuts
Lower the car to the ground turning the jack
handle counterclockwise. When the vehicle is
firmly on the ground, remove the jack and
tighten the wheel nuts securely. At the first
available opportunity, the wheel nut torque
should be checked with a suitable torque
wrench.
Wheel nut tightening torque
Steel wheel & aluminium alloy wheel:
65-80 lb.ft (900-1,100 kg.cm)
SD070K1-E
AFTER CHANGING WHEELS
The pressure of the spare tyre should be
checked at the first available opportunity. If any
doubt exists as to the tyre pressure, the vehicle
should be driven slowly to the nearest service
station and the tyre pressure checked and
adjusted as required.
If the valve cap is lost from any of the valves,
a replacement should be obtained and fitted at
the first available opportunity. The valve cap
prevents the ingress of dirt which may cause
the valve to stick and therefore leak and is part
of the valve sealing function.
Ensure that the spare wheel, jack and jack
handle as well tools are correctly located in the
boot of the vehicle to prevent damage and
noise.
D080A01A
o OK FOR AUTOMATIC OR MANUAL
TRANSAXLE EQUIPPED VEHICLE
SD080A1-E
VEHICLE TOWING OR RECOVERY
CAUTION:
An incorrect tow or recovery could result in
serious damage to the vehicle. If any dam-
age to the suspension, steering or transaxle
is apparent or suspected, a towing ambu-
lance must be used.
D060J01X
Loading ...
Loading ...
Loading ...