Loading ...
Loading ...
Loading ...
WHAT TO DO IN AN EMERGENCY
3-4
SD070B1-E
1. Obtain Spare Tyre and Tool
Remove the spare wheel, jack, jack handle and
tool bag from the boot.
NOTE:
The jack handle is equipped on the under-
side of the boot luggage mat.
SSA3050D
Flat tyre
SD070D1-E
2. Block the Wheel
Block the wheel that is diagonally opposite from
the flat tyre to prevent the vehicle from rolling
when the car is raised on the jack.
D060D01A
SD070E1-E
3. Loosen Wheel Nuts
The wheel nuts should be loosened slightly
before raising the car. To loosen the nuts, turn
the wheel brace counterclockwise. Ensure that
the wheel brace socket is seated properly on
the nut and that it cannot slip. Do not remove
the nuts at this stage.
SD070F1-F
4. Put the Jack in Place
The base of the jack should be placed on firm,
level ground. The jack should be positioned as
shown in the drawing.
D060E01A
<AMICA>
D060E01V
D040B01X
Loading ...
Loading ...
Loading ...