Loading ...
Loading ...
Loading ...
DO-IT-YOURSELF MAINTENANCE
6-10
C090B01X-DAG
G110D01A-GAT
To Check the Transaxle Fluid Level
G110D02A
Park the car on level ground with the parking
brake engaged. When the transaxle fluid level
is checked, the transaxle fluid should be at
normal operating temperature and the engine
idling.
G110A01A-AAT
CHECKING THE TRANSAXLE FLUID
(AUTOMATIC)
Transaxle fluid in the automatic transaxle should
be changed at those intervals specified in the
vehicle maintenance schedule in Section 5.
3. Replace the bolt, screw it in with your fin-
gers and then tighten securely with the
wrench.
G110C01X-EAT
Transaxle Fluid Capacity
The fluid capacity of the automatic transaxle is
4.56 lmp.qts (5.2 Litres).
WARNING:
The transaxle fluid level should be checked
when the engine is at normal operating tem-
perature. This means that the engine, radia-
tor, exhaust system etc., are very hot so you
should exercise great care not to burn your-
self during this procedure.
G110B01X-AAT
Recommended Fluid
Your Hyundai automatic transaxle is specially
designed to operate with ESSO JWS3314.
Damage caused by a nonspecified fluid is not
covered by your new vehicle limited warranty.
ZG100B1-A
To Check the Manual Transaxle
Oil Level
SSA6100B
Park the car on level ground with the engine off.
1. Using a wrench of the correct size, loosen
the oil filler bolt turning it counterclockwise
and remove it with your fingers.
2. Use your finger to feel inside the hole. The
oil level should be at its bottom edge. If it is
not, check for leaks before adding oil. To
refill the transaxle or bring the oil level up,
add oil slowly until it reaches the proper
level. Do not overfill.
2. If the level is correct, lubricant should begin
to drip from the plug orifice. In this case the
plug should be replaced. If the level is incor-
rect, lubricant should be added until it begins
to drip from the plug orifice at which time the
plug should be replaced.
Loading ...
Loading ...
Loading ...