Loading ...
Loading ...
Loading ...
3-3
WHAT TO DO IN AN EMERGENCY
ZD050B1-E
Handling Spare Tyre
6. If the cause of the overheating cannot be
found, wait until the engine temperature has
returned to normal. Then, if coolant has
been lost, carefully remove the radiator cap
and add water to bring the fluid level in the
reservoir up to the base of the radiator fill
opening. Fill the coolant expansion tank to
the halfway mark.
7. Proceed with caution until it is established
that the engine is operating normally. If the
engine overheats repeatedly, the advice of a
Hyundai dealer should be sought.
CAUTION:
Serious loss of coolant indicates there is a
leak in the cooling system and this should
be checked as soon as possible by a Hyundai
dealer.
3. Passengers must not be allowed to remain
inside the vehicle during wheel changing. If
a puncture occurs whilst the vehicle is on a
motorway, the passengers should take ref-
uge on the motorway embankment to avoid
the possibility of injury occurring should the
vehicle be struck by other motorway traffic.
4. Wheel changing should be performed ac-
cording to the following instructions.
ZD050A1-E
FULL-SIZED SPARE TYRE
For customer convenience and satisfaction,
Hyundai has included a full-sized spare tyre
and wheel.
The following instructions should be observed.
1. Check inflation pressure as soon as possi-
ble after installing the spare tyre, and adjust
to the specified pressure.
2. The spare tyre pressure should be checked
once a month while the tyre is stored.
Spare Tyre Pressure (cold)
D040B01X
Remove the installation bolt to remove the spare
tyre. To install the spare tyre, tighten the bolt
firmly with your fingers until the spare tyre has
no more play.
SD060A1-E
IN THE EVENT OF A PUNCTURE
If a puncture occurs whilst driving the vehicle:
1. Bring the car to rest as soon as it is safe to
do so and with the minimum amount of
braking required which will assist in main-
taining the maximum amount of control. The
vehicle should be parked wherever possible
upon firm level ground to facilitate wheel
changing.
2. If the vehicle is creating a hazard and the
road conditions do not permit the wheel to
be changed safely, assistance should be
sought.
SD070A1-E
CHANGING A FLAT TYRE
D060A01X
It is of the utmost importance that care is
exercised when changing road wheels. Ensure
that the parking brake is set and that the gear
shift lever is in reverse (P, if the vehicle has
automatic transaxle).
Tyre Size
Inflation Pressure
155/70 R13
30 psi (210 kPa)
Loading ...
Loading ...
Loading ...