Loading ...
Loading ...
Loading ...
FEATURES OF YOUR HYUNDAI
1-30
B570A02A
WARNING:
Make sure that the support rod has been
released prior to closing the bonnet. Always
double check to be sure that the bonnet is
firmly latched before driving away. If it is not
latched, the bonnet could fly open while the
vehicle is being driven, causing a total loss
of visibility, which might result in an acci-
dent. The support rod must be inserted
completely into the hole provided in the
bonnet whenever you inspect the engine
compartment. This will prevent the bonnet
from falling and possibly injuring you. Do
not move the vehicle with the bonnet in the
raised position, as vision is obstructed and
the bonnet could fall or be damaged.
B570A01A-EAT
BONNET RELEASE
B560A02A
WARNING:
Gasoline vapors are dangerous. Before re-
fueling, always stop the engine and never
allow sparks or open flames near the filler
area. If you need to replace the filler cap, use
a genuine Hyundai replacement part.
If you open the fuel filler cap during high
ambient temperatures, a slight “pressure
sound” may be heard. This is normal and
not a cause for concern.
Whenever you open the fuel filler cap, turn
it slowly.
XV10860E
1. Pull the release knob to unlatch the bonnet.
2. Press the safety catch lever up and lift the
bonnet.
3. Hold the bonnet open with the support rod.
Before closing the bonnet, return the support
rod to its clip to prevent it from rattling. Lower
the bonnet until it is about 1 ft. (30 cm) above
the closed position and let it drop. Make sure
that it locks into place.
Loading ...
Loading ...
Loading ...