Loading ...
Loading ...
Loading ...
FEATURES OF YOUR HYUNDAI
1-36
To use the heating/ventilation system to defrost
or defog the windshield:
o Set the air intake control to the position.
o Set the air flow control to the position.
o Set the temperature control to a comfortably
warm position.
o Set the fan speed control to position 3 or 4.
o If vehicle is so equipped, push on the A/C for
increased defogging action.
NOTE:
In high humidity areas the A/C can be used
with the air intake in the position for
increased defogging action.
B730A01A-AAT
OPERATION TIPS
o To keep dust or unpleasant fumes from
entering the car through the ventilation sys-
tem, temporarily set the air intake control at
the position. Be sure to return the control
to the position when the irritation has
passed to keep fresh air in the vehicle. This
will help keep the driver alert and comfort-
able.
o Air for the heating/cooling system is drawn
in through the grilles just ahead of the wind-
shield. Care should be taken that these are
not blocked by leaves, snow, ice or other
obstructions.
B740A01X-GAT
AIR CONDITIONING SWITCH
(Not all models)
B740A02X-DAG
The air conditioning is turned on by pushing the
A/C button in the fan control rotary switch.
B710C02X-DAG
B710C01X-EAT
Side Ventilator
B720A02X-DAG
B720A02X-GAT
DEFROSTING/DEFOGGING
The side ventilators are located on each side of
the dashboard.
To change the direction of the air flow, move the
knob in the centre of vent up-and-down and
side-to-side.
Loading ...
Loading ...
Loading ...