Loading ...
Loading ...
Loading ...
FEATURES OF YOUR HYUNDAI
1-9
ZB090W2-A
SEAT BELTS (2-Point Static Type)
(Rear Seat Centre)
To Fasten Your Seat Belt
ZB090V1-A
To Release the Seat Belt
The seat belt is released by pressing the re-
lease button in the locking buckle. When it is
released, the belt should automatically draw
back into the retractor.
If this does not happen, check the belt to be
sure it is not twisted, then try again.
SSD1090S
To fasten a 2-point static type seat belt, insert
the metal tab into the locking buckle. There will
be an audible “click” when the tab locks into the
buckle. Check to make sure the belt is properly
locked and that the belt is not twisted.
FUA1090R
ZB090X2-A
Adjusting Your Seat Belt
SSA1090T
Shorten
Correct
Too high
With a 2-point static type seat belt, the length
must be adjusted manually so it fits snugly
around your body. Fasten the belt and pull on
the loose end to tighten. The belt should be
placed as low as possible on your hips, not on
your waist. If the belt is too high, it could
increase the possibility of your being injured in
an accident because you could slide under it.
Loading ...
Loading ...
Loading ...