Loading ...
Loading ...
Loading ...
FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 3
B880C02A-GAT
Key Numbers
AX10030A-1
The vehicle key number is recorded upon a
metal tag attached to the keys when the vehicle
is first delivered to you.
The key number should be recorded and kept in
a safe place in case the need to order further
keys arises. New keys are available from any
Hyundai dealer by quoting the relevant key num-
ber.
In the interest of security, the metal tag attached
to the keys which bears the key number should
be removed from the key ring after you receive
your new vehicle. In addition, key numbers can-
not be provided by Hyundai for security reasons.
If you need additional keys or if you should lose
your keys, your authorized Hyundai dealer can
make new keys.
B880D02A-GAT
Limp home procedures
B880D01X
In case the immobilizer warning indicator blinks
for five seconds when the ignition key is turned to
"ON" position, this indicates that the immobilizer
system is out of order. And you cannot start the
engine without the limp home procedures with
ignition key.
The following procedure is how to start the en-
gine with the function of the limp home. (0, 1, 2,
3 as a sample password).
NOTE:
You can get the limp home password when
the vehicle is first delivered to you. If you do
not have the password, consult your autho-
rized Hyundai dealer.
1. To set the password you may turn the ignition
key "ON" and then turn it "OFF" according to
the digit numbers, then the immobilizer indi-
cator will blink along with the operation of the
ignition key. For example, turn the ignition key
once for digit number "1", and twice for "2",
and so on. However, for the digit number "0",
you must turn the ignition key for 10 times.
2. Wait for 3~10 seconds.
3. You may set the remaining number of digits
by following the same procedures 1 and 2.
4. If all of four digits have been tried success-
fully, turn the ignition key "ON" and check that
the immobilizer indicator illuminates. From
this time, you have to start your engine within
30 seconds. If you start your engine after 30
seconds, your engine will not start.
NOTE:
If the engine dies while driving after limp
home procedure, you can start your engine
within 8 seconds without limp home proce-
dure again.
5. If the immobilizer indicator blinks for five
seconds, you have to try the limp home
procedure again from the beginning.
After doing the limp home procedure, you have to
consult with your authorized Hyundai dealer as
soon as possible.
Loading ...
Loading ...
Loading ...