Loading ...
Loading ...
Loading ...
FEATURES OF YOUR HYUNDAI
1-18
ZB110G2-E
TURN SIGNAL INDICATOR
LIGHT
The blinking green arrow on the instrument
panel shows the direction indicated by the turn
signals. If the arrow comes on but does not
blink, blinks more rapidly than normal or does
not blink at all, a malfunction in the turn signal
system is indicated.
B260P02Y-AAT
ABS SERVICE REMINDER
INDICATOR (SRI) (Not all models)
When the key is turned to the “ON” position, the
ABS light will come on and then go off in a few
seconds.
If the ABS light remains on, comes on while
driving, or does not come on when the key is
turned to the “ON” position, this indicates that
there may be a problem with the ABS.
If this occurs, have your vehicle checked by
your Hyundai dealer as soon as possible. The
normal braking system will still be operational,
but without the assistance of the anti-lock brake
system.
CAUTION:
If the both ABS SRI and Parking Brake/
Brake fluid level warning lights remain "ON"
or come on while driving, there may be a
problem with E.B.D (Electronic brake force
distribution).
If this occurs, avoid sudden stops and have
your vehicle checked by your Hyundai dealer
as soon as possible.
SB210E1-E
OVERDRIVE OFF INDICATOR
LIGHT (Not all models)
When the overdrive (4th gear) switch is turned
off and the operation of overdrive (4th gear) is
cancelled, the overdrive warning light (O/D OFF)
will be illuminated. When the switch is at the on
position, the gearbox will operate in the normal
fully automatic mode and the warning light will
be extinguished.
ZB110J2-E
HIGH BEAM INDICATOR
LIGHT
This light is coloured blue and should illuminate
only when the headlight upper beam is on.
B260E02A-GAT
SEAT BELT REMINDER LIGHT
The seat belt reminder light comes on until your
seat belt is fastened when the ignition key is
turned from the "OFF" position to "ON" or
"START".
ZB110K2-E
OIL PRESSURE WARNING
LIGHT
The oil pressure warning light will illuminate
when insufficient oil pressure exists for safe
engine operation.
The light should illuminate when the ignition is
turned on and should be extinguished as soon
as the engine is started.
ZB110L3-E
PARKING BRAKE, BRAKE
CIRCUIT FAILURE
WARNING LIGHT
This light will be illuminated when the hand
brake is applied and the ignition on, and should
go out when the hand brake is released. The
vehicle should not be driven until the hand
brake has been released and the light go out. It
also will be illuminated if the brake fluid level in
the reservoir falls to the MIN. mark. If the light
illuminates while driving pull off the road if
possible and stop immediately. Contact your
nearest authorized dealer and have the system
checked.
CAUTION:
Operation of the engine with low oil pres-
sure may result in serious damage to the
engine.
Should the oil pressure light fail to extinguish
after starting or illuminate when the engine is
running, the engine must be stopped immedi-
ately. If the engine oil level is low, add a suffi-
cient quantity of oil to raise the level to the full
marking on the dip stick. Restart the engine and
check that the warning light is extinguished.
Should the light still be illuminated, stop the
engine immediately and seek assistance from
the nearest Hyundai dealer.
Loading ...
Loading ...
Loading ...