Loading ...
Loading ...
Loading ...
FEATURES OF YOUR HYUNDAI
1-14
B240C01X-EAT
SRS Care
The SRS is virtually maintenance-free and so
there are no parts you can safely service by
yourself. The entire SRS system must be in-
spected by an authorized Hyundai dealer in 10
years after the date that the car was manufac-
ture.
Any work on the airbag system, such as remov-
ing, installing, repairing, or any work on the
steering wheel must be performed by a quali-
fied Hyundai technician.
Improper handling of the airbag system may
result in serious personal injury.
WARNING:
o Modification to SRS components or wir-
ing, including the addition of any kind of
badges to the pad cover or modifica-
tions to the body structure, can adverse-
ly affect SRS performance and lead to
possible injury.
o For cleaning the horn pad, use only a
soft, dry cloth or one which has been
moistened with plain water. Solvents or
cleaners could adversely affect the airbag
cover and proper deployment of the sys-
tem.
o No objects should be placed over or near
the label identifying the airbag on the
steering wheel and instrument panel,
because any such object could cause
harm if the vehicle is in a crash severe
enough to cause the airbag to inflate.
WARNING:
o When the SRS is activated, there may be
a loud noise and fine dust will be re-
leased through out the vehicle. These
conditions are normal and are not haz-
ardous. However, the fine dust generat-
ed during airbag deployment may cause
skin irritation. Be sure to wash your hands
and face thoroughly with lukewarm wa-
ter and a mild soap after an accident in
which the airbags were deployed.
o The SRS can function only when the
ignition key is in the "ON" position. If the
SRS SRI does not come on, or continu-
ously remains on, after flashing for about
6 seconds when the ignition key is turned
to the "ON" position, or after the engine
is started, or comes on while driving, the
SRS is not working properly. If this oc-
curs, have your vehicle immediately in-
spected by your Hyundai dealer.
o Before you replace a fuse or disconnect
a battery terminal, turn the ignition key to
the "LOCK" position or remove the igni-
tion key. Never remove or replace the air
bag related fuse(s) when the ignition key
is in the "ON" position. Failure to heed
this warning will cause the SRS SRI to
illuminate.
Upon deployment, tear seams molded directly
into the pad covers will separate under pres-
sure from the expansion of the airbags. Further
opening of the covers then allows full inflation of
the airbags.
A fully inflated airbag in combination with a
properly worn seat belt slows the driver's for-
ward motion, thus reducing the
risk of head and chest injury.
After complete inflation, the airbag immediately
starts deflating, enabling the driver to maintain
forward visibility.
CAUTION:
When installing a container of liquid air
fresherer inside a vehicle, do not place it
near the instrument cluster nor on the in-
strument panel pad surface. If there is any
leakage from the air fresherer onto these
areas (instrument cluster, instrument panel
pad or air ventilator), it may damage these
parts. If the liquid from the air fresherer
does leak onto these areas, wash them with
water immediately.
Loading ...
Loading ...
Loading ...