Loading ...
Loading ...
Loading ...
DRIVING YOUR HYUNDAI
2- 2
C020A01A-EAT
BEFORE STARTING THE ENGINE
Before you start the engine, you should always:
o Look around the vehicle to be sure there are
no flat tyres, puddles of oil or water or other
indications of possible trouble.
o After entering the car, check to be sure the
parking brake is engaged.
o Check that all windows, and lights are clean.
o Check that the interior and exterior mirrors
are clean and in position.
o Check your seat, seatback and headrestraint
to be sure they are in their proper positions.
o Lock all the doors.
o Fasten your seat belt and be sure that all
other occupants have fastened theirs.
o Turn off all lights and accessories that are
not needed.
o When you turn the ignition switch to "ON",
check that all appropriate warning lights are
operating and that you have sufficient fuel.
o Check the operation of warning lights and all
bulbs when key is in the "ON" position.
o To start the engine, insert the ignition key
and turn it to the "START" position. Release
it as soon as the engine starts. Do not hold
the key in the "START" position for more
than 15 seconds.
NOTE:
For safety, the engine will not start if the
shift lever is not in "P" or "N" Position (Auto
T/A).
ZC050A2-E
KEY POSITIONS
"START"
The engine is started in this position. It will
crank untill you release the key.
NOTE:
Do not hold the key in the "START" position
for more than 15 seconds.
"ON"
When the key is in the "ON" position, the ignition
is on and all accessories may be turned on. If the
engine is not running, the key should not be left
in the "ON" position. This will discharge the
battery and may also damage the ignition sys-
tem.
"ACC"
With the key in the "ACC" position, the radio and
other accessories may be operated.
"LOCK"
The key can be removed or inserted in this
position. Steering is locked by removing the key.
When unlocking the steering, insert the key, and
then turn the steering wheel and key simulta-
neously.
C040A01E
LOCK
ACC
ON
START
C030A02X-GAT
COMBINATION IGNITION SWITCH
To Start the Engine
o If your Hyundai is equipped with a manual
transaxle, place the shift lever in neutral and
depress the clutch pedal fully.
o If your Hyundai has an automatic transaxle,
place the shift lever in "P" (park).
WARNING:
The engine should not be turned off or the
key removed from the ignition key cylinder
while the car is in motion.
Loading ...
Loading ...
Loading ...