Loading ...
Loading ...
Loading ...
FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 25
wiper blade wear. For the same reason, do not
operate the washer when the washer fluid reser-
voir is empty.
B340G02X-GAT
HEADLIGHT LEVELING DEVICE SYS-
TEM (If installed)
To adjust the headlight beam level according to
the number of the passengers and the loading
weight in the luggage area, turn the beam level-
ing switch.
The higher the number of the switch position, the
lower the headlight beam level. Always keep the
headlight beam at the proper leveling position, or
headlights may dazzle other road users.
Listed below are the examples of proper switch
settings. For loading conditions other than those
listed below, adjust the switch position so that the
beam level may be the nearest as the condition
obtained according to the list.
B390A01X-GAT
REAR WINDOW WIPER AND WASHER
(If installed)
B390A01X
3
2
1
To operate the rear wiper and washer, turn the
barrel on the end of the multifunction switch.
1. OFF
2. When the point indicates the , the rear
windshield wiper starts to operate continu-
ously.
3. The washer fluid will be spray onto the rear
winshield by indicating the point onto the .
The wiper operates continuously after the
washer fluid is sprayed.
Do not operate the washer continuously for more
than 15 seconds or when the fluid reservoir is
empty; this could damage the system.
Do not operate the wiper when the window is dry;
this can result in scratching as well as premature
B370A01A-AAT
HAZARD WARNING SYSTEM
The hazard warning system should be used
whenever you find it necessary to stop the car in
a hazardous location. When you must make
such an emergency stop, always pull off the road
as far as possible.
The hazard warning lights are turned on by
pushing in on the hazard switch. This causes all
Loading condition
Driver only
Driver + front passenger
Full passengers
(including driver)
Full passengers (including
driver) + Permissible load
Driver + Permissible load
Switch position
0
0
1
1
2
B340G01X
HMX404D
Loading ...
Loading ...
Loading ...