User Manual - Page 18

For 2002 HYUNDAI ATOS.

Loading ...
Loading ...
Loading ...
FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 9
YR10301B
B180A01A-GAT
SEAT BELTS-Driver's 3-Point System
with Emergency Locking Retractor
To Fasten Your Belt
B160D01A-AAT
When to Replace Seat Belts
The entire seat belt assembly or assemblies
should be replaced if the vehicle has been in-
volved in an accident. This should be done even
if no damage is visible. Additional questions
concerning seat belt operation should be direct-
ed to your Hyundai Dealer.
B170A03X-GAT
HEIGHT ADJUSTABLE FRONT SEAT
SHOULDER BELT (If installed)
B170A01X
You can adjust the height of the front seat shoul-
der belt anchor to one of 4 positions. The shoul-
der belt should be adjusted so that it fits midway
over the shoulder, and NEVER across the neck.
To adjust the height of the shoulder belt anchor,
pull on the height adjuster knob and then lower or
raise the height adjuster into an appropriate. To
raise the height adjuster, pull it up. To lower it,
push it down while pressing the height adjuster
button. Release the knob to lock the anchor into
position. Try to slide the anchor upward and
downward after releasing the knob to make sure
that it has locked into position.
WARNING:
o The height adjuster must be in the locked
position whenever the vehicle is moving.
o The misadjustment of height of the shoul-
der belt could reduce the effectiveness of
the seat belt in a crash.
B160C01A-AAT
Keep Belts Clean and Dry
Seat belts should be kept clean and dry. If belts
become dirty, they can be cleaned by using a
mild soap solution and warm water. Bleach, dye,
strong detergents or abrasives should not be
used because they may damage and weaken
the fabric.
To fasten your seat belt, pull it out of the retractor
and insert the metal tab into the buckle. There will
be an audible "click" when the tab locks into the
buckle.
The seat belt automatically adjusts to the proper
length only after the lap belt is adjusted manually
so that it fits snugly around your hips.
If you lean forward in a slow, easy motion, the belt
will extend and let you move around. If there is a
sudden stop or impact, however, the belt will lock
into position. It will also lock if you try to lean
forward too quickly. Check to make sure that the
belt is properly locked and that the belt is not
twisted.
Loading ...
Loading ...
Loading ...