2002 HYUNDAI ATOS User Manual

Loading ...

DO-IT-YOURSELF MAINTENANCEDO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

6-17

G270A02X-GAT

HEADLIGHT BULBHEADLIGHT BULB

HEADLIGHT BULB

Replacement instructions:

1. Allow the bulb to cool. Wear eye protection.

2. Always grasp the bulb by its base, avoid

touching the glass.

3. Disconnect the connector, then remove the

dust cover.

4. Push the bulb spring for removing the head-

light bulb.

5. Remove the headlight bulb. If the bulb is

burned out, replace it with the same watt-

age.

6. Installation is the reverse order of the re-

moval.

7. Use the protective cap and carton to promptly

dispose of the old bulb.

8. Check for proper headlight aim.

WARNING:WARNING:

WARNING:

The halogen bulb contains gas under pres-The halogen bulb contains gas under pres-

The halogen bulb contains gas under pres-

sure and if impacted sure and if impacted

sure and if impacted

could shatter, and re-could shatter, and re-

could shatter, and re-

sulting in flying fragments. Always wear eyesulting in flying fragments. Always wear eye

sulting in flying fragments. Always wear eye

protection protection

protection

when servicing the bulb. Protectwhen servicing the bulb. Protect

when servicing the bulb. Protect

the bulb against abrasions or scratches andthe bulb against abrasions or scratches and

the bulb against abrasions or scratches and

against liquids when lighted. Turn the bulbagainst liquids when lighted. Turn the bulb

against liquids when lighted. Turn the bulb

on only when installed in a headlight. Re-on only when installed in a headlight. Re-

on only when installed in a headlight. Re-

place the headlight if damaged or cracked.place the headlight if damaged or cracked.

place the headlight if damaged or cracked.

Keep the bulb out of the reach Keep the bulb out of the reach

Keep the bulb out of the reach

of childrenof children

of children

and dispose of the used bulb with care.and dispose of the used bulb with care.

and dispose of the used bulb with care.

G290A02X-GAT

HEADLIGHT AIMING ADJUSTMENTHEADLIGHT AIMING ADJUSTMENT

HEADLIGHT AIMING ADJUSTMENT

Before performing aiming adjustment, make sure

of the following.

1. Keep all tires inflated to the correct pres-

sure.

2. Place the vehicle on level ground and press

the front bumper & rear bumper down sev-

eral times. Place the vehicle at a distance of

3,000 mm (118 in.) from the test wall.

3. See that the vehicle is unloaded (except for

full levels of coolant, engine oil and fuel, and

spare tire, jack, and tools). Have the driver

or equivalent weight placed in driver's seat.

Recommended FluidRecommended Fluid

Recommended Fluid

Use PSF-3 type fluid.

NOTE:NOTE:

NOTE:

Do not start the engine when the powerDo not start the engine when the power

Do not start the engine when the power

steering oil reservoir is empty.steering oil reservoir is empty.

steering oil reservoir is empty.

G240A01A-AAT

POWER STEERING HOSESPOWER STEERING HOSES

POWER STEERING HOSES

It is suggested that you check the power steer-

ing hose connections for fluid leakage at those

intervals specified in the vehicle maintenance

schedule in Section 5.

The power steering hoses should be replaced if

there is severe surface cracking, pulling, scuff-

ing or worn spots. Deterioration of the hose

could cause premature failure.

G260A03A-AAT

REPLACING HEADLIGHT BULBSREPLACING HEADLIGHT BULBS

REPLACING HEADLIGHT BULBS

Before attempting to replace a headlight bulb,

be sure the switch is turned to the "OFF"

position.

The next paragraph shows how to reach head-

light bulbs so they may be changed. Be sure to

replace the burned-out bulb with one of the

same number and wattage rating.

CAUTION:CAUTION:

CAUTION:

Keep the lamps out of contact with petro-Keep the lamps out of contact with petro-

Keep the lamps out of contact with petro-

leum product, such as oil, gasoline, etc.leum product, such as oil, gasoline, etc.

leum product, such as oil, gasoline, etc.

G270A01X

Loading ...

User Manual - Page 113