LV-7280 User Manual

Loading ...

5. Using On-Screen Menu

The Power-saving mode is the mode that allows you to put the projector in the power-saving condition which con-

sumes less power than the Normal mode. The projector is preset for Normal mode at the factory.

Normal .................. POWER indicator: Orange light/STATUS indicator: Green light

Power-saving ........ POWER indicator: Red light/STATUS indicator: Off

The following connectors, buttons or functions will not work during this mode.

- SERVICE PORT, MONITOR OUT connector, and AUDIO OUT connector

- LAN, Mail Alert, Direct power on (Comp1) functions

- Buttons other than POWER button on the cabinet

- Buttons other than POWER button on the remote control

NOTE:Yoursettingwillnotbeaffectedevenwhen[Reset]isdonefromthemenu.

Enabling Direct Power ON [Direct power on

(AC)]

Turns the projector on automatically when AC power is supplied. This eliminates the need to always use the POW-

ER button on the remote control or projector cabinet.

Turning On the Projector By Applying Computer Signal [Direct power on (Comp1)]

When the projector is in Standby mode, applying a computer signal from a computer connected to the ANALOG

IN-1 input will power on the projector and simultaneously project the computer’s image.

This functionality eliminates the need to always use the POWER button on the remote control or the projector

cabinet to power on the projector.

To use this function, rst connect a computer to the projector and the projector to an active AC input.

NOTE:

• Disconnectingacomputersignalfromthecomputerwillnotpowerofftheprojector.Werecommendusingthisfunctionin

combinationofthePowermanagementfunction.

• Thisfunctionwillnotbeavailableunderthefollowingconditions:

- whenacomponentsignalisappliedtotheANALOGIN-1connector

- whenaSynconGreenRGBsignalorcompositesyncsignalisapplied

• Once[Directpoweron(Comp1)]isturnedon,[Power-saving]modecannotbeselected.[Power-saving]modewillnottake

effectregardlessofwhetheritisselectedfor[Standbymode].

• ToenabletheDirectpoweron(Comp1)afterturningofftheprojector,wait3secondsandinputananalogRGBsignal.

 IfananalogRGBsignalisstillpresentwhentheprojectoristurnedoff,theDirectpoweron(Comp1)willnotworkandthe

projectorremainsinstandbymode.

Enabling Power Management [Power management]

When this option is selected you can enable the projector to automatically turn off (at the selected time: 5 min., 10

min., 20 min., 30 min.) if there is no operation with no signal received by any input. When the remaining time reach-

es 3 minutes, a message will be displayed to that effect.

Selecting Default Source [Default source select]

You can set the projector to default to any one of its inputs each time the projector is turned on.

Last ....................... Sets the projector to default to the previous or last active input each time the projector is turned on.

Auto ....................... Searches for an active source in order of Computer 1 → Computer 2 (Digital) → Computer 2 (Analog)

→ VIDEO → S-VIDEO → Computer 1 and displays the ﬁrst found source.

Computer 1 ........... Displays the RGB source from the Computer 1 Input [ANALOG IN-1] connector every time the projector

is started up.

Computer 2 (Digital)

... Displays the DVI digital source from the Computer 2 Input [DIGITAL IN/ANALOG IN-2] (Digital) connec-

tor every time the projector is started up.

Computer 2 (Analog)

.. Displays the RGB analog source from the Computer 2 Input [DIGITAL IN/ANALOG IN-2] (Analog) con-

nector every time the projector is started up.

VIDEO .................... Displays the Video source from the VIDEO IN connector every time the projector is started up.

S-VIDEO ................ Displays the Video source from the S-VIDEO IN connector every time the projector is started up.

Loading ...

User Manual - Page 74