LV-7280 User Manual

Loading ...

5. Using On-Screen Menu

Selecting Signal Format [Input signal select]

[Computer1],[Computer2(Analog)]

Allowsyoutochoose[Computer1]or[Computer2(Analog)]foranRGBsourcesuchasacomputer,or[COM-

PONENT]foracomponentvideosourcesuchasaDVDplayer.Normallyselect[RGB/COMPONENT]andthe

projector automatically detects a component signal. However there may be some component signals that the

projectorisunabletodetect.Ifthisisthecase,select[COMPONENT].

[VIDEO&S-VIDEOSystemSelect]

This feature enables you to select composite video standards automatically or manually.

Normallyselect[Auto]andtheprojectorwillautomaticallydetectthevideostandard.

In the case where the projector has difficulty detecting the video standard, select the appropriate video stan-

dard from the menu.

This must be done for VIDEO and S-VIDEO respectively.

Enabling or Disabling WXGA Mode [WXGA mode]

Selecting[On]willgiveprioritytoaWXGA(1280x768)signalinrecognizinganinputsignal.

When[WXGAmode]issetto[On],anXGA(1024x768)signalmaynotberecognizedonLV-7385,LV-7380,LV-

7285orLV-7280.Inthiscase,select[Off].

Enabling the deinterlace [Progressive]

Turns on or off the deinterlace function for a telecine signal.

Off ......................... Select this option if there is any jitter or artifacts in video.

On .......................... Default standard setting.

NOTE:ThisfeatureisnotavailableforRGBandHDTVsignals.

Enabling Key Sound and Error Sound [Beep]

This feature turns on or off the keypad sound or alarm when a button on the cabinet and the remote control is

pressed or an error occurs.

NOTE:The[Beep]soundvolumecannotbeadjusted.The[Beep]soundcannotbemutedbyusingtheBLANKbutton.Toturnoff

the[Beep]sound,select[Off]for[Beep].

[Options (2)]

Setting Off Timer [Off timer]

You can use the Off Timer feature to turn off the projector (standby mode) automatically at a preset time.

Eight preset times can be selected: Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00 and 16:00.

Theremainingcount-downtimewillbeshownatthetoprightofthemenuwhenthe[Offtimer]ispreset.

ThePOWERindicatorblinksgreenincycleof2.5secondsonand0.5secondoffwhen[Offtimer]ispreset.

When the off timer remaining time reaches 3 minutes, a message will be displayed to that effect.

Selecting Power-saving in [Standby mode]

Theprojectorhastwostandbymodes:[Normal]and[Power-saving].

Loading ...

User Manual - Page 73