LV-7280 User Manual

Loading ...

Important Information

10˚

For UK only: In UK, a BS approved power cord with moulded plug has a Black (ve Amps) fuse installed for use

with this equipment. If a power cord is not supplied with this equipment please contact your supplier.

Important Safeguards

These safety instructions are to ensure the long life of your projector and to prevent re and shock. Please read

them carefully and heed all warnings.

Installation

• Donotplacetheprojectorinthefollowingconditions:

- on an unstable cart, stand, or table.

- near water, baths or damp rooms.

- in direct sunlight, near heaters or heat radiating appliances.

- in a dusty, smoky or steamy environment.

- on a sheet of paper or cloth, rugs or carpets.

• Ifyouwishtohavetheprojectorinstalledontheceiling:

- Do not attempt to install the projector yourself.

- The projector must be installed by qualied technicians in order to ensure proper operation and reduce

the risk of bodily injury.

- In addition, the ceiling must be strong enough to support the projector and the installation must be in ac-

cordance with any local building codes.

- Please consult your dealer for more information.

Do Not Use in the Following Environments

Do not install the projector in a humid or dusty place or a place where there is much oily

smoke or cigarette smoke. Optical parts such as a lens and mirror are stained, resulting in

poor picture.

Do not use the projector in a place where the temperature becomes very high or low.

Operating temperature: +5°C to +40°C Storage temperature: -10°C to +50°C

(Quiet mode selected automatically at 95°F to 104°F / 35°C to 40°C)

Place the projector in a horizontal position

The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other

than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.

Fire and Shock Precautions

• Ensurethatthereissufficientventilationandthatventsareunobstructedtopreventthebuild-upofheatin-

side projector. Allow at least 1 m (3.3') of space between your projector and a wall.

• Preventforeignobjectssuchaspaperclipsandbitsofpaperfromfallingintoyourprojector.Donotattempt

retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or

screwdriver into your projector. If something should fall into your projector, disconnect it immediately and

have the object removed by a qualied service personnel.

• Donotplaceanyobjectsontopoftheprojector.

• Donottouchthepowerplugduringathunderstorm.Doingsocancauseelectricalshockorre.

• Theprojectorisdesignedtooperateonpowersourcevoltagesindicatedontheratinglabelontheprojector.

Ensure that your power ts this requirement before attempting to use your projector.

• Donotlookintothelenswhiletheprojectorison.Seriousdamagetoyoureyescouldresult.

Loading ...

User Manual - Page 5