LV-7280 User Manual

Loading ...

ANALOG IN-1

AUDIO IN

DIGITAL IN/

ANALOG IN-2

PHONE

2. Installation and Connections

When Viewing a DVI Digital Signal

To project a DVI digital signal, be sure to connect the PC and the projector using a DVI cable (not supplied) before

turning on your PC or projector. Turn on the projector rst and select Computer 2 (Digital) from the source menu

before turning on your PC.

Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed.

Should this happen, restart your PC.

Do not disconnect the DVI cable while the projector is running. If the signal cable has been disconnected and then

re-connected, an image may not be correctly displayed. Should this happen, restart your PC.

NOTE:

• UseaDVIcableortheonecompliantwiththeDDWG(DigitalDisplayWorkingGroup)DVI(DigitalVisualInterface)revision1.0

standard.TheDVIcableshouldbewithin5m(196)long.BothsingleanddualtypesofDVIcablecanbeused.

• TheDVI(DIGITAL)connectoracceptsVGA(640x480),SVGA(800x600),1152x864,XGA(1024x768),WXGA(1280x800@up

to60Hz),andSXGA(1280x1024@upto60Hz).

Stereo mini-plug audio cable

(not supplied)

IBM PC or Compatibles (Desktop type)

or Macintosh (Desktop type)

DVI cable (not supplied)

• Selecttheinputnameforitsappropriateinputconnectorafterturningontheprojector.

Input connector

Use the INPUT button on the projector cabinet or the remote

control to select the appropriate input from the menu.

DIGITAL IN /

ANALOG IN-2

Computer 2 (Digital)

Loading ...

User Manual - Page 25