Loading ...
Loading ...
Loading ...
50 English
Maintenance
Maintenance
02
4. Remove the second sheet from the door
in the arrow direction.
03
5. Remove the third sheet from the door
in the arrow direction.
6. Clean the glass with soapy water and a
clean cloth.
CAUTION
To identify the correct side of the sheet,
locate the “PYRO” mark on the corner of
every sheet.
Correct direction: PYRO-**-**
Wrong direction:
02
03
01
01 Support clip 1
02 Support clip 2
03 Support clip 3
7. When done, reinsert the sheets as
follows:
• See the picture and locate the
hinges. Insert sheet 3 below
support clip 1, sheet 2 between
support clip 1 and 2, and sheet
1 into support clip 3 in this order.
Make sure the printed side of
sheets is inserted inward.
4. When done, follow steps 1 to 2 above
in the reverse order to reinstall the
door. Make sure the clips are hinged on
both sides.
Door glass
Depending on the model, the oven door is equipped with 3-4 sheets of glass
placed against each other. Do not remove the door glass unless for cleaning
purposes. To remove the door glass for cleaning, follow these instructions.
1. Use a screwdriver to remove the screws
on the left and -right sides.
01
2. Detach the coverings in the arrow
directions
3. Remove the rst sheet from the door.
NV73N9770RM_EU_DG68-00613K-00_EN.indd 50 4/12/2018 2:19:21 PM
Loading ...
Loading ...
Loading ...