Loading ...
Loading ...
Loading ...
26 English
Operations
Operations
NOTE
• If the oven is heavily soiled with grease, for example, after roasting or grilling,
it is recommended to remove stubborn soil manually using a cleaning agent
before activating Steam cleaning.
• Leave the oven door ajar when the cycle is complete. This is to allow the
interior enamel surface to dry thoroughly.
• While the oven is hot inside, auto cleaning is not activated. Wait until the oven
cools down, and try again.
• Do not pour water onto the bottom by force. Do it gently. Otherwise, the water
overows to the front.
Descale
Clean inside the steam generator to prevent affecting the food quality and taste.
12:00
AM
Descaling required
Now Later
The oven counts the time of vapour cooking
cycles, and asks you to run the descaling
when necessary. You can still enable vapour
functions for the next two hours without
going through the descaling. However, no
vapour function will be enabled after the
two hours unless activating and completing
the descaling cycle.
Smart
Control
Favourites TimerCleaning
1. Access Menu > Cleaning > Descale, and
then tap Start.
Steam cleaning
This is useful for cleaning light soiling with vapour.
Smart
Control
Favourites TimerCleaning
1. Access Menu > Cleaning > Steam
cleaning, and then tap Start.
2. Remove all accessories, and then tap
OK.
3. Pour 400 ml (⁄ pint) of water onto
the bottom of the oven and close the
oven door, and then tap OK. It takes 26
minutes to complete the cycle.
4. Use a dry cloth to clean inside the oven.
WARNING
Do not open the door before the cycle is complete. The water inside the oven is
very hot, and it can cause a burn.
NV73N9770RM_EU_DG68-00613K-00_EN.indd 26 4/12/2018 2:19:15 PM
Loading ...
Loading ...
Loading ...