Loading ...
Loading ...
Loading ...
MiEV Remote System
3-54 General information/Charging
3
Charging Timer is
not possible.
After the power/commu-
nication switch is
pressed, the following
symbol blinks in several
seconds.
ERROR symbol
symbol
Regular charge connector is not inserted
or not locked completely.
Lock the regular charge connector securely.
A household electrical outlet, which the
EV charging cable (regular charger) is
connected to, is shut down.(e.g. discon-
nected plug)
Turn on the household electrical outlet which the
EV charging cable (regular charger) is connected
to.
Ground fault at the household electrical
outlet. Otherwise, the power supply at the
household electrical outlet is cut off.
Check the ground fault and confirm the plug is con-
nected.
If the charging unit is equipped with the
timer function, the power supply to the
unit has been cut off.
Preset the Charging Timer while the charging unit
with timer function is powered on.
After the power/commu-
nication switch is
pressed, the following
symbol blinks in several
seconds.
ERROR symbol
The selector lever is at a position other
than P (PARK).
Place the selector lever to P (PARK) position.
Quick charging is in progress. (The
symbol illuminates.)
Terminate the quick charging, or wait until the
quick charging completes.
The temperature of the Main Drive Lith-
ium-ion Battery has exceeded about
140 °F (60 °C).
Allow the temperature of the Main Drive Lithium-
ion Battery to reach normal operating temperature.
Refer to “Cautions and action to deal with intense
heat” on page 3-8.
Phenomena Cause Remedy
BK0220401US.book 54 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...