Loading ...
Loading ...
Loading ...
12V starter battery
9-8 Vehicle care and maintenance
9
N00901300054
1. Turn the plastic nut (A) counterclockwise,
and then remove the 12V starter battery
upper cover (B).
1. Install the 12V starter battery upper cover
(B) onto the 12V starter battery, and then
push the plastic nut (A) in the direction
shown by the arrows to secure the cover.
N00901500069
Before checking the 12V starter battery elec-
trolyte level, remove the 12V starter battery’s
upper cover.
The electrolyte level must be between the
limits shown on the outside of the 12V starter
battery. Fill it with distilled water as needed.
The inside of the 12V starter battery is
divided into several compartments. Take the
cap off of each compartment and fill to the
mark.
Do not fill above the top line because a spill
during driving could cause damage.
Removing and installing the
12V starter battery upper cover
To rem ove
NOTE
Be careful not to lose the removed plastic
nut.
To install
CAUTION
Be sure to install the 12V starter battery
upper cover. Otherwise, the battery electro-
lyte may spill and cause a malfunction.
When installing the 12V starter battery upper
cover and plastic nut do not touch the cool-
ing fan or other moving parts under the hood.
Be especially careful that the cables, your
clothing or hair, etc., do not get caught in the
cooling fan or other moving parts.
NOTE
Be sure to install the plastic nut in the correct
direction.
Checking 12V starter battery
electrolyte level
WARNING
If the 12V starter battery goes flat, be sure
to check the 12V starter battery electro-
lyte level before connecting booster cables.
BK0220401US.book 8 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...