Loading ...
Loading ...
Loading ...
Power window control
5-14 Features and controls
5
Use the following procedure to test the sys-
tem:
1. Lower the driver’s window.
2. Arm the system as explained in “Armed
stage”.
3. Make sure that the theft-alarm indicator
comes on and flashes for approximately
20 seconds.
4. Wait a few seconds and then unlock the
driver’s side door by using the inside door
lock knob. Open the door.
5. Make sure that the horn sounds intermit-
tently and the headlights blink when a
door is opened.
6. Disarm the system by unlocking all doors
and the liftgate by using the keyless entry
system.
N00510801410
The amount of time after unlocking until the
vehicle relocks automatically can be
adjusted. See a certified i-MiEV dealer for
details.
Once the system has been disarmed, it can-
not be rearmed except by repeating the arm-
ing procedure.
Testing the theft-alarm system
NOTE
Power window control
1- Open (down)
2- Close (up)
NOTE
Never try to operate the main switch and
sub-switch in different directions at the same
time. This will freeze the window in posi-
tion.
Operating the power windows repeatedly
with the electric motor unit stopped will run
down the 12V starter battery. Use the win-
dow switches only while the electric motor
unit is operating.
Do not turn the electric motor switch to the
“ON” position during quick charging.
Doing so will stop quick charging.
WARNING
Before operating the power windows,
make sure that nothing can be trapped
(head, hands, fingers, etc.) in the window.
Never leave the vehicle without carrying
the key.
Never leave children or unreliable adults
unattended inside the vehicle.
BK0220401US.book 14 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...