Loading ...
Loading ...
Loading ...
Quick charging (charging method with quick charger)
3-30 General information/Charging
3
9. Close the inner lid and close the quick
charging lid.
CAUTION
Do not leave the quick charge connected to
the quick charge port after charging.
Someone might stumble on the charger or
the quick charge port might get damaged.
NOTE
Although it is possible to start the electric
motor unit if quick charging has not finished
normally, the charging indicator is continu-
ously blinking. In such a situation, perform
quick charging again and finish it normally
or contact a certified i-MiEV dealer.
WARNING
After charging, be sure to close the inner
lid and the quick charging lid completely.
Be careful that water or dust does not
enter in the quick charge port, inner lid
and quick charge connector.
Entry of water or dust could cause a fire,
electric shock or short circuit.
NOTE
If the electric motor switch is turned to the
“START” position with the quick charge
connector connected to the quick charge
port, the electric motor unit cannot be
started.
Be sure to disconnect the quick charge con-
nector before starting the electric motor unit.
Charging may stop before full charge. This is
a control for efficient charge and not a mal-
function.
To achieve full charge, repeat charging from
Step 5 again.
Make sure that the inner lid is completely
closed before closing the quick charging lid.
If the quick charging lid is forcibly closed
without first completely closing inner lid, the
hinge on the inner lid may be broken.
BK0220401US.book 30 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...